System Board Switches; System Configuration Switch (Sw3); System Switch (Sw2) - Compaq 222863-001 - TaskSmart W2200 Model 10 Maintenance And Service Manual

System Board Switches

The TaskSmart W2200 appliance server has two switchbanks (SW2 and SW3) for system
configuration and a nonmaskable interrupt (NMI) switch that is used for NMI events.
Refer to the labels on the inside of the appliance access panel or to the following subsections for
the proper switch settings. Figure 4-4 and Table 4-4 show the location of the system switches.
Figure 4-4. System board switches
Item




3
Table 4-4
System Board Switches
Description

System configuration switch (SW3)

System switch (SW2)

Nonmaskable interrupt (NMI) switch
Connectors, Switches, and LEDs 4-5
1
2