Replacing The Camera - Lenovo 40221GU Hardware Maintenance Manual

Replacing the camera

4. Pull the system fan away from the chassis.
5. Align the four screw holes on the new system fan to the four mounting
holes on the chassis.
6. Insert and tighten the four screws to secure the system fan.
7. Connect the system fan cable to the system board.
8. Install the LCD panel. Refer to steps 5 to 6 of the "Replacing the LCD
panel" section.
9. Install the computer cover. Refer to "Completing the installation" .
To replace the camera
1. Remove the computer cover. Refer to "Removing the computer cover" .
2. Remove the LCD panel. Refer to steps 2 to 4 of the "Replacing the LCD
panel" section.
3. Remove the two screws that secure the camera to the chassis
disconnect one end of the camera cable from the rear of the camera
Chapter 7. Replacing hardware
1
and
59