Compaq dc7800 - Convertible Minitower PC Hardware Reference Manual page 43

Convertible minitower

Hide thumbs Also See for dc7800 - Convertible Minitower PC:

Table of Contents

Place the thermal sensor on top of the hard drive in a position that does not cover the label (1) and

attach the thermal sensor to the top of the hard drive with the adhesive strip (2).

Figure 2-33

Slide the cover on the carrier (1) and replace the screw on the rear of the carrier to secure the cover

in place (2).

Figure 2-34

10.

Slide the hard drive carrier into the enclosure on the computer and lock it with the key provided.

NOTE:

ENWW

Replacing the Thermal Sensor

Replacing the Carrier Cover

The carrier must be locked for power to be supplied to the hard drive.

Installing Additional Drives

Table of Contents

Dc7800 series