Installing The Camera Module; Removing The Fan - Dell Vostro 3360 Owner's Manual

Installing the Camera Module

1. Connect the camera cable to the camera module and place the camera module to its original position on the
display assembly.
2. Install :
a) display bezel
b) display assembly
c) display hinge cover
d) battery
e) palmrest
f) keyboard
g) access panel
3. Follow the procedures in

Removing the Fan

1. Follow the procedures in
2. Remove:
a) access panel
b) keyboard
c) palmrest
d) battery
e) display hinge cover
f) display assembly
3. Remove the screw that secures the fan to the computer. Then, lift the fan and disconnect the fan cable from the
system board.
28
After Working Inside Your Computer .
Before Working Inside Your Computer .