Table of Contents
Advertisement
9.
Lift the palmrest up and away from the computer.
Installing the Palmrest
1.
Starting from the edges of the palmrest, press downwards on the palmrest to engage the tabs on the computer.
2.
Tighten the screws to secure the palmrest to the front of the computer.
3.
Connect the power LED cable and the LED board cable to the system board.
4.
Connect the quick launch board cable, the finger print reader cable, and the palmrest cable to the system board.
5.
Tighten the screws to secure the palmrest to the back of the computer.
6.
Push the rubber pads to cover the screws on the computer.
7.
Install the keyboard.
8.
Install the access panel.
9.
Follow the procedures in
After Working Inside Your Computer .
17
Hide quick links:
Advertisement
Table of Contents
