Advanced; Security - Dell Vostro 2520 Owner's Manual

Advanced

Intel SpeedStep
Virtualization
Integrated NIC
USB Emulation
USB Wake Support
SATA Operation
Adapter Warnings
Function Key Behavior
Charger Behavior
Miscellaneous Devices

Security

Set Service Tag
Set Supervisor Password
Set HDD Password
Password Bypass
Computrace
Enable or disable the Intel SpeedStep
feature.
Enable or disable the Intel
Virtualization feature.
Enable or disable the power supply to
the on–board network card.
Enable or disable the USB emulation
feature.
Allows USB devices to wake-up the
computer from standby. This feature
is enabled only when the AC adapter
is connected.
Change the SATA controller mode to
either ATA or AHCI.
Enables or disables adapter warnings. Default: Enabled
Specifies the behavior of the function
key <Fn> .
Specifies if the computer battery will
be charged when connected to an AC
power source.
These fields let you enable or disable
various on-board devices.
This field displays your system's service tag. If the service
tag is not already set, this field can be used to enter it.
Allows you to change or delete the administrator
password.
Allows you to set a password on the computer's internal
hard drive (HDD).
Allows you to bypass the system password and the
internal HDD password prompts during a system restart/
resume from hibernate state.
Enable or disable the Computrace feature on your
computer.
Default: Enabled
Default: Enabled
Default: Enabled
Default: Enabled
Default: Disabled
Default: AHCI
Default: Function key first
Default: Enabled
43