Dell SmartStep 200N Replacement Manual page 44

44 Display Assembly and Di splay Latch
2
1
1 black M2.5 x 6-mm screws
2 silver M2 x 5-mm screws
3 M2 x 5-mm display cable
4 display
5 bottom case
Remove two black M2.5 x 6-screws from the top of the computer.
6
Remove the two silver, round-headed M2 x 5-mm screws from the top
7
of the computer.
Pull up and remove the black display cable from its connector.
8
Remove the round-headed M2 x 5-mm screw from the gray display
9
cable, and use the pull-tab to remove the gray cable from its connector.
Ensure that the gray cable is clear of the palm rest.
3
(2)
(2)
screw
4
5