Sony XAV-701BT Installation/Connections page 2
Av center
Hide thumbs
Also See for XAV-701BT:
- User manual ,
- Service manual (124 pages) ,
- Installation/connections (2 pages)
Advertisement
Foot brake type
Parking brake switch cord
A
B
1
2
1
b
a
a
b
Clips (not supplied)
Face the hook inwards.
Hand brake type
Parking brake switch cord
2
c
a
b
a
b
Clip (not supplied)
Choose the installation location carefully so that the unit
Avoid installing the unit in areas subject to dust, dirt,
Use only the supplied mounting hardware for a safe and
To open/close the front panel smoothly, insert/eject a
Mounting angle adjustment
Adjust the mounting angle to less than 45°.
Be sure to connect the parking brake lead (light green) of
the power supply connection cable to the parking brake
switch cord. The mounting position of the parking brake
switch cord depends on your car. Consult your car dealer
or your nearest Sony dealer for further details.
To capture your voice during handsfree calling, you need
to install the microphone .
Cautions
Keep the microphone away from extremely high
It is extremely dangerous if the cord becomes wound
If airbags or any other shock-absorbing equipment is in
A
1
2
Larger than 182 mm (7
1
/
in)
4
Larger than 111 mm (4
3
/
in)
8
Claws
B
Size:
5 × max. 8 mm
(
7
/
× max.
5
/
in)
32
16
Bracket
Parts supplied with your car
Precautions
-A Installing on the sun visor
1
Install the microphone
a
on the clip
.
b
2
Install the clip
b
on the sun visor.
will not interfere with normal driving operations.
3
Install clips (not supplied) and adjust the length
and position of the cord so that it does not
excessive vibration, or high temperature, such as in
obstruct your driving.
direct sunlight or near heater ducts.
secure installation.
-B Installing on the dashboard
1
Install the microphone
a
on the clip
b
, then
disc easily, and especially to drive safely, a certain
place the cord along the groove of the clip
.
distance between the front panel and the shift lever is
b
2
necessary. The necessary distance differs, depending on
Attach the clip
b
to the dashboard with the
the shift lever position of your car. Before installing the
double-sided tape
c
.
unit, choose the installation location carefully so that
3
Install a clip (not supplied) and adjust the length
you can drive safely.
and position of the cord so that it does not
obstruct your driving.
87 mm (3
1
/
in)
2
Notes
Shift lever
Before attaching the double-sided tape
c
, clean the surface of the
dashboard with a dry cloth.
Adjust the microphone angle to the proper position.
The microphone
a
can be installed without using the clip
b
.
In this case, directly attach the microphone to the dashboard with the
double-sided tape
c
. Keep the unused clip
b
for future use.
Removing the bracket
Before installing the unit, remove the bracket
from the unit.
1
Insert both release keys together between the
unit and the bracket until they click.
2
Pull down the bracket , then pull up the unit to
separate them.
Connecting the parking brake
lead
Adjusting the frames
You can adjust the projecting part of the unit when the
unit is mounted.
Projecting part
Installing the microphone
Shift lever
temperatures and humidity.
1
Remove the screws from both sides of the unit.
around the steering column or gearstick. Be sure to keep
2
Choose a screw hole from , or on each
it and other parts from obstructing your driving.
frame .
If you secure the frames with the screw holes (default position),
your car, contact the store where you purchased this
it will maximize the projecting part of the unit. On the other hand,
unit, or the car dealer, before installation.
screw holes will minimize the projecting part.
3
Reattach the frames with the selected screw
holes with the removed screws .
Notes
Choose the same screw hole position on both frames.
If you intend to secure the frames with screw holes or , make sure
that there is enough space in the dashboard of your car for the unit.
3
Dashboard
To the dashboard/center console
Size:
5 × max. 8 mm
(
/
× max.
/
in)
7
32
5
16
Bracket
Mounting the unit
Reset button
When the installation and connections are completed, be
sure to press the reset button with a ballpoint pen, etc.
-A Mounting the unit with the supplied
bracket
1
Position the supplied bracket inside the
dashboard.
2
Bend the claws outward for a tight fit.
3
Mount the unit onto the supplied bracket .
-B Mounting the unit in a Japanese car
You may be able to install this unit in some makes of
Japanese cars without the supplied bracket. If you cannot,
consult your Sony dealer.
When mounting this unit to the preinstalled brackets of
your car, use the supplied screws in the appropriate
screw holes, based on your car: T for TOYOTA, M for
MITSUBISHI and N for NISSAN.
Notes
To avoid a malfunction, install only with the supplied screws .
Do not apply excessive force to the buttons of the unit.
Do not press on the LCD.
Before mounting, make sure there is nothing on the top of the unit.
Warning if your car's ignition
has no ACC position
Be sure to set the Auto Off function. For details, refer to
the supplied "Operating Instructions. "
The unit will shut off completely and automatically in the
set time when no source is selected, which prevents
battery drainage.
If you do not set the Auto Off function, press and hold
until the display disappears each time
you turn the ignition off.
Power connection diagram
The auxiliary power connector may vary depending on
your car. Check your car's auxiliary power connector
diagram to make sure the connections match correctly.
There are three basic types (illustrated below). You may
need to switch the positions of the red and yellow leads of
the unit's power supply connection cable .
After matching the connections and switched power
supply leads correctly, connect the unit to the car's power
supply. If you have any questions and problems
connecting your unit that are not covered in these
instructions, please consult your car dealer.
Auxiliary power connector
Red
Red
Yellow
Yellow
4
Yellow
Continuous power supply
7
Red
Switched power supply
Red
Red
Yellow
Yellow
4
Yellow
Switched power supply
7
Red
Continuous power supply
Red
Red
Yellow
Yellow
A car without an ACC position
Advertisement
