Setting The Tv On The Wall - Sharp Aquos LC-52LE640U Operation Manual

Appendix

Setting the TV on the Wall

■ LC-70LE640U/LC-60LE640U/LC-52LE640U/LC-70C6400U/LC-60C6400U/LC-52C6400U
CAUTION
• This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP). The use of other
wall mount brackets may result in an unstable installation and may cause serious injuries.
• Installing the TV requires special skill that should only be performed by qualifi ed service personnel. Customers
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or
mounting that results in accident or injury.
Using an optional bracket to mount the TV
• You can ask a qualifi ed service professional about using an optional AN-52AG4 bracket to mount the TV on the wall.
• Carefully read the instructions that come with the bracket before beginning work.
Hanging on the wall
AN-52AG4 wall mount bracket.
(See the bracket instructions for details.)
Vertical mounting
• Due to the terminal configuration on this TV, when
you wall-mount this model, make sure there is enough
space between the wall and the TV for the cables.
• To use this TV mounted on a wall, remove the AC cord
holder and the covers at the 4 locations on the rear of
the TV, and then use the screws supplied with the wall
mount bracket to secure the bracket to the rear of the
TV.
68
Angular mounting
LC-70LE640U
LC-70C6400U
1
1
LC-60/52LE640U
LC-60/52C6400U
1
About setting the TV angle
AN-52AG4 LC-70LE640U/LC-70C6400U
• The center of the display:
0/5°
25
/ inch (10.0 mm) above the "c"
64
position.
LC-60LE640U/LC-60C6400U
• The "e" position is at the center of
the display.
LC-52LE640U/LC-52C6400U
• The center of the display:
13
2 / inches (56.0 mm) under the
64
"e" position.
• Refer to the operation manual of
AN-52AG4 for details.
2
1
2