Samsung HT-E355 User Manual page 15

Connecting The Speakers
1. Press down the terminal tab on the back of the speaker. (HT-E355 Only)
2. Insert the black wire into the black terminal (–) and the red wire into the red
terminal (+), and then release the tab.(HT-E355 Only)
3. Connect the connecting plugs to the back of the product by matching the
colours of the speaker plugs to the speaker jacks.
Connecting the wall mount
1. Connect the speaker cord with the colour
tube to (+), and the speaker cord without the
colour tube to (–).
2. Prepare screws (not supplied) that are suitable
for the hole on the back of each speaker.
See the illustrations below.
3. Fasten the screws to the wall, then hang the
speaker on the wall.
In case of HT-E350
Front Speaker (R)
Surround Speaker (R)
* Refer to page 14 for the speakers of HT-E355.
8 to 10 mm
Depth of fastened screw
SPEAKERS OUT
FRONT CENTER FRONT
SURROUND SUBWOOFER SURROUND
FA NET
VIDEO OUT
(Only For Service) SPEAKER IMPEDANCE : 3
Black
Colour tube
Front left speaker (L) : White
Front right speaker (R) : Red
Center speaker : Green
Surround left speaker (L) : Blue
Surround right speaker (R) : Gray
4 mm
30 mm
Hole on the back of the speaker
Center Speaker
Front Speaker (L)
AUX
IN
FM ANT HDMI OUT
Surround Speaker (L)
Subwoofer
Red
5 mm
10 mm
15
English