Water Boiling - Samsung CTN464NC01 User Manual

Ctn464nc01 4 burner 'anyplace' induction hob
Hide thumbs Also See for CTN464NC01:
Table of Contents

Advertisement

waTEr boIlINg

1. Touch the corresponding cooking zone's key.
2. Touch the Water boiling sensor.
3. Set the desired power level which will be used
after water boiling.
After water boiling, the cooking zone will
automatically reduce to this power level and an
acoustic signal sounds.
Use Water boiling fuction only to heat water.
Never leave the hob unattended when in use.
WARNING
This may result in fire.
This is not available in the Complete Bridge zone.
The amount of water available for each cooking zone is as follows:
Use only water at room temperature.
The boiling temperature and time may differ, depending on the amount of water,
the water temperature and the bottom type of the container.
Do not touch or remove the cookware while the Water boiling function is in
progress.
However, this function may not operate properly when the cooking zone is already
hot.
CTN464NC01_XEU_00344A-01_EN-121018.indd 27
Cooking zone
160 mm
210 mm
Front or Rear Bridge
amount of water
1 Liter ~ 2 Liters
1 Liter ~ 3 Liters
1 Liter ~ 3 Liters
hob use _27
2012-10-18
9:40:19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents