Audio Reset; Pip Menu; Configuration1 Menu; Auto Adjust - Philips BDL4245E/27 User Manual

Volume
Adjust to increase or decrease the audio output level.
Mute
Turn the mute function on/off.
Audio source
Select the audio input source according to the audio signal source
connected to the audio input and HDMI sockets on the monitor.
The options are: {HDMI} / {Audio1} / {Audio2} / {Audio3}.

Audio reset

Reset all settings in the AUDIO menu.

4.2.4. PIP menu

PIP
Picture
PIP input
Screen
PIP change
PIP size
Audio
PIP audio
PIP
PIP reset
Configuration1
Configuration2
Advanced option
PIP
Select the PIP (Picture-in-Picture) mode.
The options are: {Off} / {PIP} / {POP} / {PBP aspect} / {PBP full}.
PIP input
Select the input signal for the sub-picture.
PIP change
Exchange between the main picture and sub picture.
PIP size
Select the size of the sub picture in the PIP (Picture-in-Picture) mode.
The options are: {Small} / {Medium} / {Large}.
PIP audio
Select the audio source in the PIP (Picture-in-Picture) mode.
• {Main} - Select audio from the main picture
• {Sub} - Select audio from the sub picture.
PIP reset
Reset all settings in the PIP menu.
NOTES:
• The PIP function is available only for certain signal source
combinations as shown in the table below.
• The availability of the PIP function will also depend on the resolution
of the input signal being used.
Main Picture
Sub Picture
DVI
VGA
HDMI
YPbPr
S-Video
Video
(O: PIP function available, X: PIP function unavailable)
By pressing the [PIP ON/OFF] button on the remote control, you can
change the mode in the order shown below:
PIP POP
The resolutions in the PIP and POP modes are configured as follows:
PIP SIZE {SMALL} : 320 x 240 pixels
{Medium} : 480 x 320 pixels
{LARGE} : 640 x 480 pixels
POP SIZE : 450 x 338 pixels
NOTE: I mages displayed in the sub picture always fit the PIP sizes
shown above irrespective of the aspect ratio of the input
image.

4.2.5. Configuration1 menu

Picture
Screen
Audio
PIP
Configuration1
Configuration2
Advanced option
Switch on state
Select the monitor status used for the next powering on.
The options are: {Power off} / {Forced on} / {Last status}.

Auto adjust

Use this function to let the monitor automatically optimize the display
of VGA input image.
NOTE: T his item is functional for VGA input only.
Power save
Set the monitor to reduce the power automatically.
• {RGB} - Select {On} to let the monitor enter DPMS mode with no
signal detected from the HDMI Graphic mode,
VGA inputs after three successive cycles.
• {VIDEO} - Select {On} to let the monitor enter power saving mode
with no signal detected from the HDMI Video mode or YPbPr
inputs after three successive cycles.
17
BDL3245E / BDL4245E / BDL4645E
DVI VGA HDMI YPbPr S-Video Video
X X X X
X X X X
X X X X
X X X X
O O O O
O O O O
PBP aspect PBP full
Switch on state
Auto adjust
Power save
Language
Panel saving
Color system
Network control port
Network settings
Configuration reset
Factory reset
HDMI, DVI-D, or
O O
O O
O O
O O
X X
X X
Off