Installing And Removing Table Stands - Philips BDL4245E/27 User Manual

BDL3245E / BDL4245E / BDL4645E
1.4.

Installing and Removing Table Stands

To install table stands:
1. Power off the monitor.
2. Spread a protective sheet on a flat surface.
3. Grab the carrying handles and place the monitor face-down on the protective sheet.
4. After inserting the stand in the guide block, tighten the screws on both sides of the monitor.
NOTE: T he long-end side of the stand should face to the front while installing.
Carrying handle
Thumbscrews
Longer portions directs to the front
Table stand
To remove table stands:
1. Power off the monitor.
2. Spread a protective sheet on a flat surface.
3. Grab the carrying handles and place the monitor face-down on the protective sheet.
4. Remove screws using a screwdriver and place them in a safe place for reuse.
2