Where To Look For Blockages - Dyson DCo7 User Manual

6057-DCO7 OPS MAN (UPDATE) 10/23/01 12:26 PM Page 6
Turn power off and unplug
before starting to clear any
blockages.
Important
Please note that clearing
blockages is not covered by
your cleaner's guarantee.

Where to look for blockages

Check that tools are clear of Remove wand and check
blockages. inside for blockages.
Remove bin assembly from
machine.
NB Should any part of the
machine become blocked
it may overheat and stop
due to the thermal cut-out
being triggered. Unplug
from mains and leave to
cool down for at least
30 minutes.
A
B
Press hose release button A Tilt machine forward and
from front of machine and slide out U-bend airway
slide hose out with lower inspection B. Check inside
cable winder from rear. for blockages.
Check inside hose for
blockages.
2
C
Squeeze valve release Lie cleaner on its front.
catches to remove airway
1 Undo coloured fasteners
inspection valve C. Check
using a coin and remove
inside for blockages.
soleplate.
2 Clear the brushbar
obstruction, carefully
cutting away any
threads.
Replace soleplate and tighten
fasteners.