Displaying The Status And Result Of Positioning - Panasonic DMC-ZS20W Basic Owner's Manual

■

Displaying the status and result of positioning

The icons that indicate the status and result of positioning will
appear on the LCD monitor. When the camera successfully executes
positioning, it records the current location and displays the place name
information on the screen.
Place name
information
●
Positioning will take time in environments where it is difficult to
receive the signals from the GPS satellites. For details, refer to
"Using the GPS function to record the location of a picture" (Owner's
Manual for advanced features).
●
Even if GPS reception is good, it will take approx. 2 to 3 minutes
to successfully execute positioning under the following conditions;
when positioning is executed for the first time, or when positioning is
executed after the camera is turned off with the [GPS Setting] set to
[OFF] or [Airplane Mode] set to [ON], and then turned on again.
GPS reception icon
The same number of icons as the
number of the GPS satellites (from
which radio signals are successfully
received) stop flashing and light (blue).
If the three bars of the GPS reception
icon do not light and the icon turns
off, it means that positioning was
unsuccessful.
Positioning result icons
(Time elapsed after successful positioning)
(minute)
: No positioning information has been
acquired.
Positioning
executed
successfully
(ENG) VQT4B72
23