Chartview - Garmin aera 796 Pilot's Manual

5.3 CHARTVIEW

NOTE: Either ChartView or FliteCharts may be used at one time, but not both.
ChartView resembles the paper version of Jeppesen terminal procedure charts. The
aircraft position is displayed on the moving map in the plan view of the approach
charts and on airport diagrams.
The geo-referenced aircraft position is indicated by an aircraft symbol displayed on
the chart when the current position is within the boundaries of the chart. Inset boxes
are not considered within the chart boundaries. Therefore, when the aircraft symbol
reaches a chart boundary line, or inset box, the aircraft symbol is removed from the
display.
The figure below, shows examples of off-scale areas, indicated by the grey shading.
Note, the grey shading is for illustrative purposes only and will not appear on the
published chart or display. These off-scale areas appear on the chart to convey
supplemental information. However, the depicted geographical position of this
information, as it relates to the chart planview, is not the actual geographic position.
Therefore, when the aircraft symbol appears within one of these areas, the aircraft
position indicated is relative to the chart planview, not to the off-scale area.
The ChartView database subscription is available from Jeppesen, Inc. Available data
includes:
• Arrivals (STAR)
• Departure Procedures (DP)
• Approaches
190-01194-00 Rev. C
• Airport Diagrams
• NOTAMs
Garmin aera 795/796 Pilot's Guide
Additional Features
145