Using Input Devices; Remote Control - Epson EasyMP.net Network Option Board Installation Manual

Using Input Devices

The pointer can be moved on the screen using the remote controller, the optional
mouse or the USB tablet. The following section explains how to use these input
devices.

Remote Control

You can use the center
pointer.
Moving the mouse pointer
Push the
move the mouse pointer in any desired
direction.
Right-clicking
Click the [ESC] button.
If you have set the right and left mouse buttons to reverse on the PC, the
functions of [Enter] and [ESC] buttons are also reversed on the remote
controller.
button and operate within EasyMP.net by moving the
button on the remote control to
Left-clicking
Press the [Enter] button. When you click it
twice in succession, the button is double-
clicked.
Drag and drop
Hold down the [Enter] button for
approximately 1.5 seconds. The button will
light and the Drag mode will be selected. Push
the button in a desired direction, and
selected object will be dragged.
Press the [Enter] button to drop selected
object.
Also, you can select the Drag mode by
holding down the "ESC" button for
approximately 1.5 seconds.
25