Troubleshooting; Where To Get Help; Telephone Support Services; Internet Support - Epson PowerLite 1761W Quick Setup

8
Press the Menu button on the remote control, select the Network menu,
and press .
9
Choose Network Configuration and press
10
Select the Basic menu and press
11
Select the Projector Name setting, press
16 characters long) to identify your projector over the network.
Use the displayed keyboard to enter characters. Press the arrow buttons
on the remote control to highlight the characters and press
them.
Note: See the online User's Guide for information on adding passwords.
12
Select the Wireless LAN menu and press
13
Select the Connection Mode setting, press
options:
•
Quick to connect the projector to one computer on the network (Ad
Hoc)
•
Advanced to connect the projector to multiple computers on
the network (infrastructure)
14
If you selected Quick connection mode, select the Channel setting for
your wireless network and turn on the SSID Auto Setting setting.
15
Select the type of wireless network you are using as the Wireless LAN
Sys. setting.
16
If you selected Advanced connection mode, enter your network SSID (up
to 32 characters) as the SSID setting.
17
If your network assigns addresses automatically, select IP Settings and
turn on the DHCP setting. If not, turn off the DHCP setting and enter
the projector's IP Address, Subnet Mask, and Gateway Address, as
needed.
18
To prevent the SSID and IP address from appearing on the network
standby screen, set the SSID Display and/or IP Address Display settings
to Off.
19
When you are finished, select Complete and press
again to save your settings.
.
.
, and enter a name (up to and enter a name (up to
to select
.
, and choose one of these and choose one of these
, then press
20
Press the Menu button to exit the menu system.
21
See "Install network software" for additional instructions.
Install network software
Install the EasyMP Network Projection software on each computer that will
®
project over the network. Use the CD labeled Epson Projector Software to
install the program.
For instructions on installing and using your network software, click the icon
on your desktop to access the online EasyMP Network Projection Operation
Guide (requires an Internet connection). If you don't see the EasyMP Network
Projection Guide icon, you can install it from the projector CD or go to the
Epson website, as described below.
To monitor and control your projector over the network, download and install
the EasyMP Monitor software and manual from the Epson support web site.
You can install a link to the downloads page from the projector CD or go to the
Epson website, as described below.

Troubleshooting

If you see a blank screen or the No signal message after turning on your
computer or video device, check the following:
•
Make sure the power light on the projector is green and not flashing, and
the A/V Mute slide is open.
•
Press the Source Search button on the projector or the remote control to
switch to the correct image source, if necessary.
•
If you're using a Windows laptop, press the function key on your
keyboard that lets you display on an external monitor. It may be labeled
CRT/LCD or have an icon such as
Fn key while pressing it (such as Fn + F7). Wait a moment for the display
to appear.
•
If you're using a Mac laptop, open System Preferences and select
Displays. Select the VGA Display or Color LCD option if necessary, then
click the Arrange or Arrangement tab, and select the Mirror Displays
check box.

Where to get help

Manuals
For more information about using the projector, click the icons on your desktop
to access the manuals (may require an Internet connection). If you don't have
icons to the manuals, you can install them from the projector CD or go to the
Epson website, as described below.

Telephone Support services

To use the EPSON PrivateLine Support service, call (800) 637-7661 and enter
® ®
the PIN on the EPSON PrivateLine Support card included with your projector.
This service is available 6 to 6
am
the duration of your warranty period. You may also speak with a projector
support specialist by dialing:
US: (562) 276-4394, 6 to 8 , Pacific Time, Monday through Friday, and 7
am pm
to 4 , Pacific Time, Saturday
pm
Canada: (905) 709-3839, 6 to 8
am
Days and hours of support are subject to change without notice. Toll or long
distance charges may apply.

Internet support

Visit www.epson.com/support (U.S.) or www.epson.ca/support
(Canada) for solutions to common problems. You can download utilities and
documentation, get FAQs and troubleshooting advice, or e-mail Epson.
. You may have to hold down the
, Pacific Time, Monday through Friday, for
pm
, Pacific Time, Monday through Friday
pm
am