Adjust The Image; Using The Remote Control - Epson PowerLite 1761W Quick Setup

Adjust the image

1
If you don't see an image, press the Source Search button on the
projector or the remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
2
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
3
PowerLite 1776W: Press the Focus buttons to sharpen the image.
PowerLite 1761W/1771W: Rotate the focus ring to sharpen the image.
PowerLite
1776W
PowerLite
1761W/1771W
4
Turn the zoom ring to reduce or enlarge the image.
PowerLite
1776W
PowerLite
1761W/1771W
5
Your projector automatically adjusts images that look like
but if necessary you can press the
correct it.

Using the remote control

Make sure the batteries are installed as shown (two AA batteries).
Turn projector on
and off
Access projector
menus
Turn off projector
display
For more information on using the remote control, see the online User's Guide.
or ,
or buttons on the projector to
Choose which source
to display
Navigate projector
menus
Get solutions to
common problems
Project wirelessly
Follow the steps here to connect the projector wirelessly over an 802.11n,
802.11g, or 802.11b wireless network. Your computer must have a wireless
card or built-in wireless interface, and be running Windows 7, Windows Vista
Windows XP Professional x64, Windows XP, or Windows 2000, or
Mac OS X 10.4 to 10.7.
1
Turn off the projector and unplug the power cord.
2
To install the wireless LAN module, turn the projector over and remove
the screw securing the wireless LAN module cover.
3
Remove the wireless LAN module cover.
4
Insert the wireless LAN module into the port.
5
Replace the cover and secure it using the screw.
6
Plug in and turn on the projector.
7
To configure your projector for your wireless network, do one of the
following:
•
If you're using the optional Quick Wireless Connection USB key,
insert it into the projector's USB TypeA port, wait for the displayed
message, remove the key, and connect it to a USB port on your
computer. Follow the on-screen instructions to install the driver, then
run your presentation. For details, see the online User's Guide.
•
If you're not using the key, continue with the following steps.
,
®