Product Description; Cooking Surface Layout; Daily Use - Electrolux EHH3920BOK User Manual

28 www.electrolux.com
• Contact your municipal authority for in-
formation on how to discard the appli-
ance correctly.

3. PRODUCT DESCRIPTION

3.1 Cooking surface layout

3.2 Electric cooking zones
control knobs
Symbol

4. DAILY USE

WARNING!
Refer to the Safety chapters.
To switch on and increase the heat set-
ting turn the knob clockwise. To decrease
the heat setting turn the knob counter-
clockwise. To switch off turn the knob to
the 0.
When a cooking zone operates, it
hums for a short time. This is typi-
cal of all ceramic glass cooking
zones and does not show that the
appliance operates incorrectly.
Power indicator is activated when either
of the zones are turned on, and will stay
on until the cooking zones are switched
off. When you turn a cooking zone, a sin-
gle beep indicates that the appliance is
working properly.
180 mm
140 mm
4
Function
0 off position
• Disconnect the appliance from the
mains supply.
• Cut off the mains cable and discard it.
1
Rear cooking zone 1800 W
1
Front cooking zone 1400 W
2
2
Power indicator
3
Control knobs
4
3
Symbol
4.1 Before first use
Put cookware containing water on each
cooking zone, set the maximum position
and operate the appliance for 10 min.
This is to burn off the residue in the appli-
ance. After that, operate the appliance at
minimum position for 20 min. During this
period, an odour and smoke can occur.
This is normal. Make sure that the airflow
is sufficient.
After this operation, clean the appliance
with a soft cloth soaked in warm water.
4.2 Automatic switch off
The hob deactivates automatically if:
• All cooking zones are deactivated.
• You use incorrect cookware.
• You do not deactivate a cooking zone
or change the heat setting.
Function
1 minimum heat
9 maximum heat