Load Paper - Canon FAXPHONE L75 Setup Sheet

Load paper.

1 Insert a stack of paper into the multi-purpose tray 1 (print side facing you and
top edge first), then adjust the paper guides A to the width of the paper 2.
2 Attach the multi-purpose tray cover to prevent dust accumulating inside the
machine.
A
Attach the handset to the machine.
1 Remove the screws A from the plugs B and insert the plugs into the holes on
the handset cradle.
2 Turn the machine so that the left side is facing you and the right side is against a
wall.
3 Insert the plugs (with the handset cradle) into the holes on the machine.
4 Use a cross-point screwdriver or a coin to push the screws into the plugs.
Make sure the screws are pushed in as far as they will go.
1
2
2
A
B
B
NOTE
• If the screws are not pushed fully
into the plugs the handset cradle
will not be securely attached to
the machine.