Canon Wireless File Transmitter WFT-E7A Instruction Manual page 76

Using the Transmitter with WFT Server
76
Enter the encryption key.
6
Enter a 5-digit encryption (WEP) key and press the
<7> button.
The key entered here will be saved on the
computer and used to access the master camera
from the computer.
Switch to setting up the slave cameras.
7
On the slave cameras, select [OK].
Check the number of slave cameras.
8
On the master camera LCD monitor, the number of
slave cameras detected is displayed.
Establish the connection.
9
On the master camera and all slave cameras,
select [OK].
A screen confirming the connection of the camera
is displayed.
Settings information is stored on the cameras. It is
not stored on the transmitters.