Canon Wireless File Transmitter WFT-E7A Instruction Manual page 75

Connect the Master and Slave Cameras
Using the Transmitter with WFT Server
Set up the slave cameras.
1
Set up the slave cameras as described on page 70.
Set up the master camera.
2
Complete settings on the master camera following
steps 1–3 on page 70, and then select [Master].
Select [Manual connect].
3
Select the connection mode.
4
Select the wireless LAN ad hoc mode supported
by the computer.
Specify the channel.
5
When selecting [Manual setting], specify the
same channel on the master camera, slave
cameras, and computer.
75