Memory Configurations - Asus M4A88T-V EVO/USB3 User Manual

1.7.2

Memory configurations

You may install 512MB, 1GB, 2GB, and 4GB unbuffered ECC and non-ECC DDR3 DIMMs
into the DIMM sockets.
• You may install varying memory sizes in Channel A and Channel B. The system maps
the total size of the lower-sized channel for the dual-channel configuration. Any excess
memory from the higher-sized channel is then mapped for single-channel operation.
• We recommend that you install the memory modules from the blue slots for better
overclocking capability.
• Always install DIMMs with the same CAS latency. For optimum compatibility, we
recommend that you obtain memory modules from the same vendor.
• Due to CPU spec., AMD
ASUS design, this motherboard can support up to DDR3 1333MHz.
• When overclocking, some AMD CPU models may not support DDR3 1600 MHz or
higher frequency DIMMs.
• Due to the memory address limitation on 32-bit Windows
or more memory on the motherboard, the actual usable memory for the OS can be
about 3GB or less. For effective use of memory, we recommend that you do any of the
following:
-
-
• This motherboard does not support DIMMs made up of 256 megabits (Mb) chips or less.
• The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value. To operate at the vendor-marked or at a
higher frequency, refer to section 2.4 Ai Tweaker menu for manual memory frequency
adjustment.
• For system stability, use a more efficient memory cooling system to support a full
memory load (4 DIMMs) or overclocking condition.
M4A88T-V EVO Series Motherboard Qualified Vendors Lists (QVL)
DDR3-2000(O.C.)MHz capability
Vendor Part No.
KINGSTON KHX2000C8D3T1K3/3GX(XMP)
KINGSTON KHX2000C9D3T1K3/3GX(XMP)
KINGSTON KHX2000C8D3T1K3/6GX(XMP)
Transcend TX2000KLU-4GK(XMP)
ASUS M4A88T-V EVO Series
100 and 200 series CPUs support up to DDR3 1066MHz. With
®
Install a maximum of 3GB system memory if you are using a 32-bit Windows
OS.
Use a 64-bit Windows OS if you want to install 4GB or more memory on the
®
motherboard.
Size
3072MB(kit of 3)
3072MB(kit of 3)
6144MB(Kit of 3)
4096MB(Kit of 2)
®
SS/ Chip Chip
Timing
DS Brand NO.
SS - - -
SS - - -
DS - - -
DS - - 9-9-9-24
OS, when you install 4GB
DIMM socket support
(Optional)
Voltage
A* B*
1.65V •
1.65V •
1.65V •
1.65V •
®
C*
1-13