Asus WL-330N3G User Manual page 69

Problem
The throughput seems slow.
I can not access the ASUS
Mobile Wireless Router web
configuration page.
Where can I get a firmware file
to upgrade the ASUS Mobile
Wireless Router?
The ASUS Mobile Wireless
Router Power LED
continuously blinks for more
than a minute.
A wireless client wants to
connect to the ASUS Mobile
Wireless Router but can not
get the correct IP from the
DHCP server. (The ASUS
Mobile Wireless Router has an
enabled DHCP.)
ASUS WL-330N3G Mobile Wireless Router
Avoid placing the device behind a metal object. Clear obstacles
between the AP and the device. Try moving the client closer to the
ASUS Mobile Wireless Router and check if the throughput increases.
Consider adding a second ASUS Mobile Wireless Router to
implement roaming.
To access the ASUS Mobile Wireless Router web configuration page,
your computer must have the same subnet as that of the ASUS
Pocket Wireless AP.
Adjust your network if your computer's subnet does not match
that of the ASUS Mobile Wireless Router.
The default IP address of the ASUS Mobile Wireless Router is
"192.168.1.1". In special cases, when the ASUS Mobile Wireless
Router in Ethernet adapter mode joins an AP network with the same
IP address, reset the ASUS Mobile Wireless Router to access the
Web Configuration utility again.
You may download the latest firmware file from the ASUS website
(www.asus.com).
Use the Firmware Upgrade page in the Web Configuration utility to
update the ASUS Mobile Wireless Router firmware.
Turn off the ASUS Mobile Wireless Router. Turn the device again and
observe if the Power LED stops blinking.
If the blinking continues, you need to restore the ASUS Mobile
Wireless Router firmware. Use the Firmware Restoration utility to
restore or update the ASUS Mobile Wireless Router firmware.
Make sure the DHCP server is working properly. Some DHCP servers
can only assign one IP address at a time. In this case, assign a fixed
IP address to your ASUS Mobile Wireless Router.
Action
A-3