Chapter 2 Hardware Installation; System Requirements; Device Installation; Before You Proceed - Asus WL-330N User Manual

2.1

System requirements

Before installing the ASUS WL-330N, make sure that your system/network meets
the following requirements:
• An Ethernet RJ-45 port (10-100Base-T)
• At least one IEEE 802.11b/g/n device with wireless capability
• An installed TCP/IP and Internet browser
2.2

Device installation

Follow these instructions to install the ASUS WL-330N.
1. Install the device utilities from the support CD.
2. Connect the device to your computer, network hub, switch, or router.
2.2.1

Before you proceed

Take note of the following guidelines before installing the ASUS WL-330N.
• The length of the Ethernet cable that connects the device to the network (hub,
ADSL/cable modem, router, wall patch) must not exceed 100 meters.
• Place the device on a flat, stable surface as far from the ground as possible.
• Keep the device clear from metal obstructions and away from direct sunlight.
• Keep the device away from transformers, heavy-duty motors, fluorescent lights,
microwave ovens, refrigerators, and other industrial equipment to prevent
signal loss.
• Install the device in a central area to provide ideal coverage for all wireless
mobile devices.
• Install the device at least 20cms from a person to insure that the product is
operated in accordance with the RF Guidelines for Human Exposure adopted
by the Federal Communications Commission.
2-2 Chapter 2: Hardware installation