Initializing The Virtual Drives - Asus P8B-M Series User Manual

5.2.3

Initializing the virtual drives

After creating the RAID set, you must initialize the virtual drives. You may initialize
the virtual drives of a RAID set using the Initialize or Objects command on the
Management Menu.
Using the Initialize command
To initialize the virtual drive using the Initialize command:
From the Management Menu, select Initialize, and then press <Enter>.
1.
LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
2. The screen displays the available RAID set and prompts you to select the
virtual drive to initialize. Use the arrow keys to select the virtual drive from the
Virtual Drive selection, and then press <Space>.
LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Virtual Drives
Virtual Drive 0
ASUS P8B-M series
BIOS Version A.10.09231523R
Initialize VD(s)
BIOS Version A.10.09231523R
Virtual Drive(s) Configured
LD RAID Size
0 1 148.580GB
Select VD
SPACE-(De)Select, F10-Initialize
#Stripes StripSz
2 64 KB
Status
ONLINE
5-13