Installing A Dimm; Removing A Dimm - Asus P8B-M Series User Manual

2.4.3

Installing a DIMM

Ensure to unplug the power supply before adding or removing DIMMs or other
system components. Failure to do so may cause severe damage to both the
motherboard and the components.
1. Press the retaining clip outward to
unlock a DIMM socket.
2. Align a DIMM on the socket
such that the notch on the DIMM
matches the DIMM slot key on the
socket.
A DIMM is keyed with a notch so that it fits in only one direction. DO NOT force
a DIMM into a socket in the wrong direction to avoid damaging the DIMM.
3. Hold the DIMM on both ends,
then insert the DIMM vertically
into the socket. Apply force
to both ends of the DIMM
simultaneously until the retaining
clips snap back into place, and
the DIMM cannot be pushed
in any further to ensure proper
sitting of the DIMM.
Always insert the DIMM into the socket VERTICALLY to prevent damage to the
DIMM notch.
2.4.4

Removing a DIMM

1. Simultaneously press the
retaining clips outward to unlock
the DIMM.
2. Remove the DIMM from the
socket.
Support the DIMM lightly with your fingers when pressing the retaining clips.
The DIMM might get damaged when it flips out with extra force.
ASUS P8B-M series
DIMM notch
2
1
DIMM slot key
3
Locked Retaining Clip
2
1
1
Unlocked retaining clip
3
1
2-17