Asus RS720Q-E7/RS12 User Manual page 165

Red Hat Enterprise Linux OS 5.6
®
To install the LSI MegaRAID controller driver when installing Red Hat
OS:
1. Boot the system from the Red Hat
2. At the boot:, type linux dd noprobe=ata1 noprobe=ata2..., then
press <Enter>.
The number of ata varies with the hard disk drive number you have when building
a RAID set. For example, if you want to build a RAID set with 6 hard disk drives,
type command line: linux dd noprobe=ata1 noprobe=ata2 noprobe=ata3
noprobe=ata4 noprobe=ata5 noprobe=ata6.
- To install or upgrade in graphical mode, press the <ENTER> key.
- To install or upgrade in text mode, type: linux text <ENTER>.
- Use the function keys listed below for more information.
[F1-Main] [F2-Options] [F3-General] [F4-Kernel] [F5-Rescue]
boot: linux dd noprobe=ata1 noprobe=ata2
Select Yes using the <Tab> key when asked if you have the driver disk, then
3.
press <Enter>.
Main Menu
Do you have a driver disk?
Yes
4. Insert the Red Hat
select OK, then press <Enter>.
Insert Driver Disk
Insert your driver disk into /dev/fd0
and press "OK" to continue.
The drivers for the RAID card are installed to the system.
ASUS RS720Q-E7/RS12, RS724Q-E7/RS12, RS726Q-E7/RS12
No
Enterprise RAID driver disk to the USB floppy disk drive,
®
OK Back
OS installation CD.
®
Enterprise
®
7-7