2.6
Cable connections
•
•
8
8
9
11
Pre-connected system cables
1.
24-pin SSI power connector (from power supply to motherboard)
2.
8-pin SSI power connector (from power supply to motherboard)
3.
System fan connectors (from motherboard FRNT_FAN1, FRNT_FAN2
FRNT_FAN3, FRNT_FAN4, and FRNT_FAN5 to system fans)
4.
USB connector (from motherboard to front I/O board)
5.
Power Supply SMBUS connector
6.
Auxiliary Panel connector (from motherboard to front I/O board)
7.
Panel connector (from motherboard to front I/O board)
8.
SATA connectors (from motherboard to SATAII/SAS backplane board)
9.
SAS connector (from motherboard to SATAII/SAS backplane board)
10. SGPIO 1 (Intel RAID)
11. PSGPIO 1,2 (LSI PIKE RAID)
2-18
The bundled system cables are pre-connected before shipment. You do
not need to disconnect these cables unless you will remove pre-installed
components to install additional devices.
Refer to Chapter 4 for detailed information on the connectors.
10
3
3
3
3
4
7
6
5
1
2
3
Chapter 2: Hardware setup