Remote Control; General; Maintenance; Cleaning - Dynex DX-L26-10A User Manual

Maintenance

Remote control

Problem
Remote control does not
work.

General

Problem
One or more channels do
not display.
Password has been
forgotten.
Some settings cannot be
accessed.
TV cabinet creaks.
Control buttons on the TV
do not work.
Maintenance

Cleaning

• Clean your TV with a soft, dry cloth. If surfaces are extremely
dirty, use a soft cloth dampened with a weak detergent solution.
• Use an eyeglass cleaner to clean the screen. Never use alcohol,
paint thinner, or benzine.
• Before using a chemically treated cloth, read the instructions that
came with the cloth.
Solution
• Make sure that the power cord is
plugged in.
• Make sure that there are no
obstructions between the remote
control and the remote control
sensor on the front of the TV.
• Make sure that the batteries are
installed correctly. For more
information, see "Installing
remote control batteries" on
page 9.
• Replace the batteries. For more
information, see "Installing
remote control batteries" on
page 9.
Solution
• Make sure that the channels are
not blocked. For more
information, see "Setting parental
control levels" on page 23.
• Make sure that the channels are
not hidden. For more information,
see "Hiding channels" on page 20.
• Enter 9999 to access parental
controls, then set a new
password.
• If a setting is grayed, the setting is
not available in the current video
input mode.
• When the TV is in use, the
temperature rises naturally and
may cause the cabinet to expand
or contract which can cause a
creaking noise. This is not a
malfunction.
• Disconnect the power cord, wait a
few seconds, then reconnect the
power cord and turn on the TV.

Specifications

Specifications subject to change without notice.
Weight and dimensions shown are approximate.
LCD TV
Type
26-inch TFT LCD
Panel
NTSC-M, ATSC
TV system
VHF: 2 - 13
Receiving channels
UHF: 14 - 69
CATV: 1 - 125
CADTV: 1 - 135
DTV: 2 - 69
BTSC system
Audio multiples
5 W (2)
Audio out
AC 120 V, 60 Hz
Power requirement
85 W
Power consumption
25.43 × 18.07 × 10.04 inches
Dimensions
(W × H × D with stand)
(64.6 × 45.9 × 25.5 cm)
20.94 lbs. (9.5 kg)
Weight
Composite video/L and R audio (2)
Input ports
S-Video (1)
Component video/L and R audio (1)
HDMI (2)
VGA/audio (1)
Antenna (1)
Audio L and R (1)
Output ports
Headphone (1)
Service port (1)
Control ports
RS-232 (1)
31