Asus F2A85-V PRO User Manual page 90

Fast Boot [Enabled]
Enable or disable boot with initialization of a minimal set of devices to launch active boot
option. Configuration options: �Disabled�� �Enabled��
The following three items appear only when you set Fast Boot to [Enabled].
USB Support [Partial Initial]
[Disabled]
[Full Initial]
[Partial Initial]
PS2 Devices Support [Enabled]
[Auto]
[Full Initial]
[Disabled]
Network Stack Driver Support [Disabled]
[Disabled]
[Enabled]
Post Logo Delay Time [3 sec]
Allows you to set additional POST Report wait time. This configuration only functions in
Normal Boot mode. Configuration options: �0 sec�� �1 sec�� �2 sec�� �3 sec�� �4 sec�� �5 sec�� �6 sec��
[7 sec] [8 sec] [9 sec] [10 sec]
Wait For 'F1' If Error [Enabled]
[Disabled]
[Enabled]
DirectKey [Go to BIOS Setup]
[Disabled]
[Go to BIOS Setup]
3-26
All USB devices will not be available until OS bootup for a fastest POST
time.
All USB devices will be available during POST. This process will extend the
POST time.
For a faster POST time, only the USB ports with keyboard and mouse
connections will be detected.
For a faster BIOS POST time, PS/2 devices will only be available when
the system boots up. PS/2 devices will not be available and BIOS Setup
program will not be accessible via PS/2 devices when the system is
restarted.
For full system control, PS/2 devices will be available during POST at any
circumstances. This process will extend the POST time.
All PS/2 devices will not be available until OS bootup for a fastest POST
time.
The BIOS skips over the Network Stack Driver and tries to boot from the
next device.
Allows the BIOS to boot from the Network Stack Driver.
Disables this function.
The system waits for the <F1> key to be pressed when error occurs.
Disables the DirectKey function. The system will only power on or
off when you press the DirectKey button.
Allows the system to power on and go to BIOS Setup directly
when you press the DirectKey button.
Chapter 3: BIOS setup