4.6.3
Installing the RAID driver during Windows
To install the RAID driver in Windows
1.
During the OS installation, the system prompts you to press the F6 key to install third-
party SCSI or RAID driver.
2.
Press <F6>, and then insert the floppy disk with RAID driver into the USB floppy disk drive.
3.
When prompted to select the SCSI adapter to install, select the RAID driver for the
corresponding OS version.
4.
Follow the succeeding screen instructions to complete the installation.
To install the RAID driver for Windows
During the OS installation, click Load Driver to allow you to select the installation
1.
media containing the RAID driver.
2.
Insert the USB flash drive with RAID driver into the USB port or the support DVD into
the optical drive, and then click Browse.
Click the name of the device you've inserted, go to Drivers > RAID, and then select
3.
the RAID driver for the corresponding OS version. Click OK.
4.
Follow the succeeding screen instructions to complete the installation.
Before loading the RAID driver from a USB flash drive, you have to use another computer
to copy the RAID driver from the support DVD to the USB flash drive.
4-28
XP:
®
Vista or later OS:
®
OS installation
®
Chapter 4: Software support