Removing Low-Voltage Differential Signaling (Lvds) Cable - Dell Latitude ST Owner's Manual

Removing Low-Voltage Differential Signaling
(LVDS) Cable
1. Follow the procedures in
2. Remove the digitizer pen.
3. Remove the label door.
4. Remove the bottom cover.
5. Remove the battery.
6. Remove the middle frame
7. Peel open the tape securing the display cable.
8. Disconnect the display cable.
The following diagram shows the display panel assembly after all the components have been removed from the
computer in the order listed above.
Before Working On Your Computer.
assembly.
19
49