Asko T760 Use And Care Manual page 8

N N A A VIGA VIGATING TING THE MENUS THE MENUS
The following paragraphs explain how to navigate
through the menus and change the preset programs.
If you don't want to make changes in all of the menus,
continue to press MENU until the one you do want to
change displays.
To restore a preset program to its original settings, simply
press the button for the preset program (P1–P4) you
want to restore and hold it down while you press ENTER.
The program will instantly revert to its original settings.
We recommend that you make two or three trial changes
to understand how easy it is to customize these
program.
Remember, the first step to customizing a preset
program is to press the button for the program you
want to customize (P1–P4).
The Program Menu
The Program menu lets you set the dry program you
prefer. You would also use this menu to set the machine
for a Timed Dry or Air Fluff program. (See "Timed Dry
and Air Fluff" on this page.)
Select
Program
Extra dry
< Next >
P1
M e n u
1. Use the Arrow buttons to move through the program
choices (Extra Dry, Dry, Normal Dry, etc.)
2. When your preference displays, press ENTER. The
LED will display the new program setting.
Press MENU to advance to the next menu or press
START to begin the program.
The Options Menu
This menu lets you set several options (such as, turning
the buzzer off and on, setting the anti-crease run time,
etc.) Only the options available with the program you
selected will display. (See "The Program Menu" on page
7.)
Select
options
Normal Cooling
< Next >
P1
M e n u
1. On this menu, you press ENTER to advance through
the options, rather than pressing MENU.
2. Press an Arrow button to toggle between Off and On.
3. When your preference displays, press ENTER. The
LED will display the new options.
Press MENU to advance to the next menu or press
START to begin the program.
Page 8
The Temperature Menu
This menu lets you set the dry temperature. Only the
temperatures available for the dry program you selected
will display.
1. Use the Arrow buttons to toggle between the
2. When the setting you prefer displays, press ENTER.
Press MENU to advance to the next menu or press
START to begin the program.
Timed Dry and Air Fluff
When you select Timed Dry or Air Fluff on the program
menu, the word "Time" and a number (of minutes) will
flash in the upper right corner of the LED window. This
indicates you must select a program time (5 to 90
minutes).
E n t e r
1. To change the number, simply press an Arrow button
2. Press ENTER to program your change.
Press MENU to advance to the next menu or press
START to begin the program. When you press START,
the time remaining for the program to run displays in
the bottom right-hand corner of the LED window, as
illustrated below:
E n t e r
NOTE: The remaining time toggles between the
Select
temperature
Temperature low
< Next >
P1
M e n u
Normal and Low temperature settings.
The LED will display the new temperature setting.
Select
time
< Next >
P1
M e n u
until the length of time you want the program to run
displays.
Air fluff progr.
Anti-Crease 1h
Air fluff
M e n u
minutes remaining (e.g., 23) and the hour(s)
remaining (e.g., 1h).
E n t e r
Time
60
E n t e r
Time
60
30
E n t e r