Specifications - Dynex DX-DVD2 User Manual

22
Resetting your player
Reset your player if you observe any of the following symptoms:
• When your player is plugged in, but the power will not turn on or off.
• When the display window is not working.
• When your player does not operate normally.
To reset your player:
• Unplug the power cord for 30 minutes, then plug in the power cord again. This

Specifications

System and outputs
VF Signal system
Frequency response
Audio S/N ratio
Audio
Audio output (analog audio)
Audio output (digital audio)
Video output
Component video (Y, Cb, Cr)
General
Power
Power consumption
Dimensions (LxWxH)
Weight
Operating temperature
Operating humidity
should reset your player.
NTSC
CD: 20 Hz~20 KHz (EIAJ)
DVD: 20 Hz~44 KHz (96 KHz)(Sample result)
20 Hz~22 KHz (48 KHz)(Sample result)
> 90 dB
MPEG LAYER2 standard
Electric level output: 1.8 ± 0.2 V
Electric level output: 0.5 V p-p
Electric level output: (1.0 ± 0.2) V p-pResistance: 75 ohm
Unbalanced negative
Electric level output: 0.7 V p-p
110~120 V 50/60 Hz
12 W
8.86 x 9.25 x 1.89 inches (225 x 235 x 48 mm)
3.53 lbs. (1.6 kg)
41°F to 95°F (5°C to 35°C)
5% to 90%
Resistance: 10 Kohm
Resistance: 75 ohm
Resistance: 75 ohm
DX-DVD2