The Entire Output Is Blank - Dell 3130cn - Color Laser Printer User Manual

Action
The print media surface may be uneven. Try changing the Paper Type setting in the printer
driver. For example, change the plain paper to thick.
1
1. On the Paper/Output tab, change the Paper Type setting.
Is the problem recovered?
Verify that the correct print media is being used. See
the print media recommended for the printer.
2
Is the problem recovered?
Replace the fuser if you have a spare.
1. Replace the fuser. See
3
2. After you replace the fuser, test print your document again.
Is the problem recovered?
Random spots/blurred images
Action
Ensure that the print cartridges are installed correctly. See
Cartridges".
1
Is the problem recovered?
Replace the print cartridge if you have a spare.
1. Replace the print cartridge. See
"Replacing Print
2. After you replace the print cartridge, click Chart Print on the Diagnosis tab.
2
3. Click the Pitch Configuration Chart button.
The Pitch Configuration Chart is printed.
Is the problem recovered?

The entire output is blank.

"Replacing the Fuser".
"Installing the Print Cartridges"
Cartridges".
"Supported Paper Sizes". If not, use
"Installing the Print
and
Yes No
The task is Go to
complete. action 2.
The task is Go to
complete. action 3.
The task is Contact
complete. Dell.
Yes No
The task is Go to
complete. action 2.
The task is Contact
complete. Dell.