Enabling the iAMT solution
To configure iAMT settings:
NOTE:
The
1.
Turn on or restart the computer.
2.
Before Windows starts up, press ctrl+p.
NOTE:
the MEBx setup utility.
3.
Enter the ME password. The factory setting for the password is admin.
The MEBx setup utility opens. Use the arrow keys to navigate.
4.
Choose to configure Intel ME, configure iAMT, or change the Intel ME password.
5.
When you have made your selections, select Exit to close the MEBx setup utility.
6
Chapter 2 Using Intel Active Management Technology (select models only)
ctrl+p
prompt is visible only if the AMT Setup Prompt option is enabled in Computer Setup.
If you do not press
ctrl+p
at the appropriate time, you must repeat steps 1 and 2 to access