4.
Align and insert the memory-module door tabs into the slots on the
computer base.
5.
Replace and tighten the two captive screws that secure the
memory-module door to the computer base.
6.
Replace the compartment door (see "Replacing the Compartment Door" on
page 14).
7.
Replace the battery pack (see "Replacing the Battery Pack" on page
CAUTION: Before turning on the computer, replace all screws and
ensure that no stray screws remain inside the computer. Failure to do
so may result in damage to the computer.
8.
Turn on the computer.
As the computer boots, it detects the additional memory and automatically
updates the system configuration information. To confirm the amount of memory
installed in the computer:
Windows Vista
®
Click Start
Control Panel
→
11).
Windows
®
7
Click Start
Control Panel
→
CHAPTER 5: MEMORY MODULE(S)
System and Maintenance.
→
System and Security
System.
→
→
024
/
024