Table 39
SNMP trap system properties (continued)
Property
OS Name
OS Version
Server Name
Subnet Mask
Total Memory
Trap Forwarding Off
Region
Time Zone
User Count
Performance event properties
Performance events occur when the performance at a switch port crosses a user-defined threshold.
Table 40
describes the event properties.
Table 40
Performance event properties
Property
Threshold Type
Measure Type
Port Number
IP Address
Source
Node Name
Port Name
Description
Event Level
Table 41
describes the properties of a device in the SAN.
Table 41
Performance device properties
Property
Label
Name
Device Type
Node Name
IP Address
Vendor
Description
Operating system name
Operating system version
Name of the appliance
Discovered subnet mask
Total physical memory
Specifies whether trap forwarding is enabled
Region of the world where the user is located
User's time zone
Number of users
Description
Performance threshold type (for example, high critical)
Performance measurement units
Port number that encountered an event
IP address of the device that encountered an event
Label of the device where the event occurred
WWN of the device that encountered an event
WWN of the port that encountered an event
Description of the performance event
Severity level
Description
Device's label, as shown on the Physical Map
Device's name, as specified in the Properties dialog box
Type of device (for example, HBA)
Device's WWN
Device's IP address
Device's vendor
HA-Fabric Manager user guide 277