Table of Contents
Advertisement
Model 11713A
Performance Tests
SECTION IV
PERFORMANCE TESTS
INTRODUCTION
The procedure in this section tests the instrument's
electrical performance.
The test can be performed without access to the
interior of the instrument.
PERFORMANCE TEST
Test equipment and accessories required to per¬
form the test are listed in Table 1-3. Equipment
other than the recommended models can be used
provided the minimum specifications are satis¬
fied.
PERFORMANCE TESTS
OPERATIONAL VERIFICATION
DESCRIPTION
This procedure checks the Driver to give reasonable assurance that it is working properly
by performing checks on major functions. This test and the local operator's check in
Section III will ensure that the Driver is operational.
Figure 4-1. Operational Verification Test Setup
EQUIPMENT;
Controller.HP 9825A
Attenuators (2)
.
.HP 8495K
RF Switches (2).HP 8761B
PROCEDURE:
1. Connect equipment as shown.
2.
Key in program shown in Table 4-1.
3.
Run the program following instructions given in the display of the controller.
4-1
Advertisement
Table of Contents
