Setting Performance Thresholds - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Optional Features
3. Choose a different option from the Measure drop-down list to change the unit
4. Choose a different option from the Time Range drop-down list to change the
5. Choose Histogram Display to display the percentage of utilization over a
6. Choose Linear Display to view a linear average of the trunk utilization.
7. Choose Running Average Display to apply an averaging algorithm to the
8. Choose the check boxes next to
9. Adjust the slide-bars at the right side of the display. As you move a slide-bar,
10. Set separate transmit and receive thresholds in either %Utilization or
11. Click Apply to All Ports if you want to apply your changes to all ports on the
12. Click OK.

Setting Performance Thresholds

Through the application, you can configure both high and low usage performance
warnings and critical thresholds.
172
of measure for the graph.
time range for the graph.
period of time.
a. Move the Histogram slide-bar to the appropriate times to change the
period of time. As you move the slide-bars, the display updates
automatically.
The application predicts potential threshold crossings. This function provides
a forward-looking trend analysis and is intended to notify the user of resource
modeling problems.
display.
This display can be smoothed on a varying percentage of an hour. To change
the display, move the slide-bar.
configure both high and low usage performance warnings and critical
thresholds.
the percentage of utilization displays in the field associated with the slide-bar
that you are adjusting.
MB/sec. Set separate error thresholds. If Running Average Display is
checked, your thresholds are only triggered if the running average crosses the
threshold.
device.
and icons to define the boundaries to
HA-Fabric Manager User Guide