Cisco 3020 - Catalyst Blade Switch Release Note page 18

Documentation Updates
•
•
Updates to the Command Reference
debug authentication
Use the debug authentication privileged EXEC command to enable debugging of the authentication
settings on an interface. Use the no form of this command to disable debugging.
Syntax Description
acct
all
auth_fail_vlan
auth_policy
autocfg
critical
dhcp
errors
events
feature
guest_vlan
mab_pm
mda
multi_auth
switch_pm
switch_sync
Release Notes for the Cisco Catalyst Blade Switch 3020 for HP, Cisco IOS Release 12.2(50)SE and Later
18
"Updates to the System Message Guide" section on page 20
"Updates to the Getting Started Guide" section on page 24
debug authentication {all | errors | events | sync | feature [all] [acct] [auth_fail_vlan]
[auth_policy] [autocfg] [critical] [dhcp] [guest_vlan] [mab_pm] [mda] [multi_auth]
[switch_pm] [switch_sync] [vlan_assign] [voice] [webauth] [all | errors | events]}
no debug authentication {all | errors | events | sync | feature [all] [acct] [auth_fail_vlan]
[auth_policy] [autocfg] [critical] [dhcp] [guest_vlan] [mab_pm] [mda] [multi_auth]
[switch_pm] [switch_sync] [vlan_assign] [voice] [webauth] [all | errors | events]}
(Optional) Display authentication manager accounting information.
(Optional) Display all authentication manager debug messages.
(Optional) Display authentication manager errors for the restricted VLAN.
(Optional) Display authentication policy messages.
(Optional) Display autoconfiguration authentication manager debug
messages.
(Optional) Display the inaccessible authentication bypass messages.
Note
(Optional) Display authentication manager debug messages on DHCP
dynamic address-enable interfaces.
(Optional) Display all authentication manager error debug messages.
(Optional) Display all authentication manager event debug messages,
including registry and miscellaneous events.
(Optional) Display authentication manager feature debug messages
(Optional) Display guest VLAN authentication manager messages.
(Optional) Display MAC authentication manager bypass authentication
debug messages.
(Optional) Display multidomain authentication manager debug messages.
(Optional) Display multi-authentication manager debug authentication
messages.
(Optional) Display switch port manager messages.
(Optional) Display synchronization messages between the switch, the
authentication server, and the connected devices.
The inaccessible authentication bypass feature is also referred to as
critical authentication or the authentication, authorization, and
accounting (AAA) fail policy.
OL-18274-02