Water Testing - Dynasty Spas 2007 Operator's Manual

KEEPING YOUR SPA WATER CLEAN & FRESH
Once the spa has been filled to the correct level and pumps are primed and
running add:
1) STAIN & SCALE REMOVER- This prevents staining, rust and corrosion,
caused by metals in the source water. One bottle will treat up to 500
gallons for up to 3 months.
2) CALCIUM BOOSTER (If Needed) - Calcium booster treats the water if
low calcium hardness is a problem in your area. It will help prevent
equipment corrosion and foaming by raising the spa's water hardness
level to an acceptable range of 120 ppm.
3) pH STABILIZER - It will properly adjust and hold the pH for up to 3
months.

Water Testing

Your Dynasty Spas Dealer is equipped to perform a thorough analysis of your
spa water. Take a one liter sample to the store and they will advise you on the
products necessary to properly balance and care for your spa. Unbalanced
spa water can quickly damage your equipment.Your Dynasty Spas Dealer will
advise you on how to protect your investment.
Balance
Spa water must have the correct chemical balance. Unbalanced water can
irritate eyes, corrode the equipment, leave mineral deposits, and decrease the
effectiveness of the sanitizer.
Balanced water means establishing proper balance among Total Alkalinity, pH,
Calcium Hardness and Total dissolved solids.
Dynasty Spas Operator's Guide • www.dynastyspas.com
17