2
OPERATION
Refrigeration System
The evaporator fan (located inside the cabinet) should operate
continuously from the time the cabinet is plugged in. This may be
verified by checking for air movement inside the cabinet. The
thermostat will click when the unit cycles on and off.
Cabinet Light
The cabinet interior light is controlled by the light switch next to the
thermostat knob inside the cabinet (see Figure 4 on page 9). The
fluorescent light will require a period of time to stabilise following
initial start up. See page 10 for instructions on replacing the
fluorescent lamp.
Loading
The cooler should be left running for 30 minutes to allow the cabinet
to cool down before loading with product. When loading the cabinet
shelves with product:
• Allow air space around all the product, for even cooling and
efficient operation of the cooler.
• Do not exceed a maximum of 30 kg per shelf.
• Do not allow products to overhang the front or rear of the
shelves, as this will effect air flow.
• Do not obstruct air flow from the evaporator fan (inside the
cabinet).
• Do not cover the drain hole in the cabinet liner bottom. Ensure
the plastic drain pin (included in the bag with the operating
instructions) is placed into the drain hole in the cabinet liner
bottom (see Figure 2 on page 7). This prevents objects from
covering the drain hole.
8
HB80/110 Serene Glass Door Cooler
User Manual