Using The Map Page - Garmin GPS 10 Deluxe Application Manual

GPS A >
PPLICATIONS

Using the Map Page

The Map Page is the primary navigation feature of the Que
application. From this page you can observe a triangular arrow
that indicates your current location and direction of travel. As
you move, this "Position Arrow" moves with you, turning when
you turn and stopping when you stop.
The Map Page displays a detailed map of the area surrounding
your current location. It allows you pan the map with the stylus
as well as view your progress when navigating. When in the
"Track Up" mode (oriented in the direction of travel), a north
reference arrow appears at the top left corner to orient the
map. When you activate the Track Log feature, your path of
movement is indicated by a dotted line.
GPS Status, Direction
Map Orientation
or Next Street and
Arrow
Data Fields
Map Scale
Indicator
Use the Map Page to:
• Determine your current location.
• View your progress while moving.
• Locate and navigate to nearby map items.
• Follow a route line when navigating.
• Access other navigation features using the Main Menu.
• Mark your current location or a map point as a waypoint.
2
Current Location
Position Arrow
Map Tool Bar
To use the Map Page:
1. Tap Start to open the Main Menu and then tap Programs.
2. Select Garmin Que to display the Map Page.
When first accessing the Map Page it will take a few moments
for the GPS receiver to locate satellites overhead before it
determines your location. While this takes place, an "Acquiring
Satellites" message will display at the top of the page.
When your location has been determined, a "3D GPS Location"
message replaces the original message. After you begin
moving, it changes to display the next street ahead and you
can also determine your direction of travel, speed and current
location by observing the data fields below the message.
At the base of the page is the Map Tool Bar with the Main
Menu, and icons for Waypoint Marker, Position Arrow, Details,
Map/Data Fields option, Find Menu, Route, Zoom Map Scale
and Pan Map. Tap and hold to display their function.
To change the map scale in increments, tapping the map scale
at the lower left side of the map displays the map scale control
panel. A scale bar is displayed with Zoom In and Out Arrows
at the top and bottom. Tapping the Up Arrow moves to scales
which show less map detail but more map area and the Down
Arrow moves to scales which increase the detail but show less
map area. Tapping a desired scale changes the map to that scale
and closes the panel.
Tapping the Map/Data Fields icon allows you to view the Map
Page in three modes, Full Map, Large Map with small Data Fields,
Map Scale Control Panel
With Data Fields Displayed
Map Tool Bar
Main Menu Details
Map/Data Fields Mark Waypoint
At "Full Page" Mode
Position Arrow Find Zoom Scale
Routes
Garmin Que Applications Guide
Pan Map