Garmin GPS 10 Deluxe Application Manual
Gps navigation software windows mobile for the pocket pc
Hide thumbs
Also See for GPS 10 Deluxe:
- Application manual (33 pages) ,
- Technical specifications (34 pages)
Related Manuals for Garmin GPS 10 Deluxe
Summary of Contents for Garmin GPS 10 Deluxe
- Page 1 Garmin Que ® GPS navigation software Windows Mobile for the Pocket PC ® application guide...
- Page 2 Information in this document is subject to change without notice. Garmin reserves the right to change or improve its products and to make changes in the content without obligation to notify any person or organization of such changes or improvements. Visit the Garmin web site (www.garmin.com) for current updates and supplemental information concerning the use and operation of this and...
-
Page 3: Setup Guide
Pocket PC that are not discussed in detail in the Garmin Que Application Guide. If you purchased your Pocket PC at the same time as the Garmin GPS receiver and are not yet familiar with its operation, it is strongly... -
Page 4: Warnings And Precautions
– and, as always, the user is responsible for their prudent use. MAP DATA INFORMATION: One of the goals of Garmin is to provide customers with the most complete and accurate cartography that is available to us at a reasonable cost. - Page 5 It is unsafe to operate the controls of the PDA while you are driving. Failure by the driver of a vehicle equipped with a PDA with Garmin Que installed to pay full attention to operation of the vehicle and road conditions while the vehicle is in motion could result in an accident with property damage and personal injury.
-
Page 6: Table Of Contents
Initializing the GPS Receiver .......... 1 Hardware Mapping..............33 Using the Map Page ............. 2 Using the Arrow Button to access Garmin Que features 33 Setting Up the Map Page Data Fields......4 Using the Jog Button to change map scale or scroll lists33 Mapping Que feature access to device hard buttons .......34... -
Page 7: Getting Started
Menus page place a cannot pass through solid materials (except glass) or dense check next to Garmin Que to place it on the Start List. overhead tree cover. When the receiver initializes for the It is important to remember that the GPS receiver will first time it may take as long as 15 minutes. -
Page 8: Using The Map Page
1. Tap Start to open the Main Menu and then tap Programs. application. From this page you can observe a triangular arrow 2. Select Garmin Que to display the Map Page. that indicates your current location and direction of travel. As When first accessing the Map Page it will take a few moments you move, this “Position Arrow”... - Page 9 GPS receiver adjusts its location. the Map Pointer. Map Pointer and Item Description Information Page with Map Color - Day Mode Map Color - Night Mode Lat/Lon Coordinates New Waypoint Page Accuracy Circle and Track Garmin Que Applications Guide...
-
Page 10: Setting Up The Map Page Data Fields
Setting Up the Map Page Data Fields To set the background for the Data Fields: The Garmin Que software allows you to customize the display 1. Tap and Hold anywhere on a data field to display of Map Page Data Fields. You can customize the background the “Customize”... -
Page 11: Setting The Display Of The Routing Data Fields
Data subjects with sub-topic lists can be identified by the small black arrow point to its right. 3. Tap the desired option to change the data field and close the list. Routing Data Field Options Garmin Que Applications Guide... -
Page 12: Using The Main Menu
The Map Page Main Menu is the starting point for accessing all that make your application functional, so you won’t need to of the Garmin Que application features. Using the Main Menu perform a setup initially. For a detailed descripion about map you can access Que Help, Map Display Setup, make System setup see page 7. -
Page 13: Map Setup
Detailed information for that map will not display if unchecked. Information at the top of the page is the description of the map set you loaded to Garmin Que using Detailed Maps MapSource. To learn how to name map sets, refer to the MapSource User’s Manual. -
Page 14: Gps Settings
To set the Maximum Zoom level: 1. For Maximum Zoom select from “OFF”, “AUTO”, or an increment from a scale of 120 feet to 800 miles. 2. Repeat for each listed map feature. Map Point Settings Garmin Que Applications Guide... -
Page 15: City Settings
2. Select the text size for each type of map item. Marine Settings To set the Maximum Zoom level: For Maximum Zoom select from “OFF”, “AUTO”, or an increment from a scale of 120 feet to 800 miles. Topo Settings Area Feature Settings Garmin Que Applications Guide... -
Page 16: System Setup
> PPLICATIONS System Setup Although your Garmin Que software will function perfectly well using the factory default settings, you will want to customize its operation to meet your personal requirements. The System Setup consists of a series of seven tabbed pages with... -
Page 17: Avoidance Settings
Buttons Settings You can select hard buttons on the unit to perform specific Que Application functions. To use hard buttons to operate Garmin Que features: 1. Tap the Arrow Button top or bottom to increase or Units Settings Page decrease the map scale or to scroll a list. -
Page 18: Language Settings
Que installation), tap “Delete Voice Language” with the language highlighted. Interface Settings The Device field is preset. The GPS 10 Bluetooth option is available only when a Garmin GPS with Bluetooth wireless ® technology is detected. The com port for communication with the GPS receiver should be detected automatically. -
Page 19: The Find Feature
4. Once you have identified the item you are searching for, place the stylus on it and hold to display a list of options for that item. Find Item Details Page Garmin Que Applications Guide... -
Page 20: Searching For Cities
Select Map. Tap Map Options this to select from the routable base map or downloaded detail maps from which to base your search for a city. Main Menu and Tool Bar Drop-Down Item Options Menu -15- Garmin Que Applications Guide... -
Page 21: Searching For An Address
Details or Route to It button on the bottom of the page to Select a Map, Find Near Selected Item, Save as Waypoint, Add to Contacts, view the address from Address Details Page the Details Page or Route To It immediately. Garmin Que Applications Guide... -
Page 22: Searching For An Intersection
You will observe data entry fields for City, Region, Two Streets and Postal Code. 3. Tap the Region field first. This will display several states or provinces near to where the Garmin Que has established your current location. Select a state or province. -
Page 23: Searching For A Point Of Interest
Note: Certain Points of Interest categories list map items only when supported by specific type map data, downloaded from MapSource. Examples these types are Topographic Maps and Marine Charts. Detail Page for Selected Item Garmin Que Applications Guide... -
Page 24: Searching For A Waypoint
Save as Waypoint icons on the tool bar at the bottom of the page. 11.Once you have selected “Route To It”, follow on- screen instructions and refer to route management information on page 24. Waypoint Details Page Garmin Que Applications Guide... -
Page 25: Creating Waypoints
To save a Find Feature item as a waypoint: With the item highlighted, hold the stylus in place until the drop down menu displays. Then tap the A Waypoint as a “Save As Waypoint” option. Route Destination Garmin Que Applications Guide... -
Page 26: Editing Waypoints
If you know the latitude and longitude coordinates for the new waypoint location, you can enter them on the Waypoint Details Page. Highlight the fields for location and enter the new coordinates. Tap OK to close and move the waypoint to that precise location. Garmin Que Applications Guide... -
Page 27: Gps Info Page
When starting up for the first time, or when you have moved to a new location more than 600 miles from the last one, it 3 Dimension Position Location will take some time for the Garmin Que to determine its new location. To facilitate the initialization process : 1. -
Page 28: Routes
Active Route Dialog. Confirm that the location displayed is your desired destination and tap the Route To It button “Calculating Route” Graphic at the bottom of the display. appears in lower right side of map Garmin Que Applications Guide... - Page 29 Locate Address in Garmin Que 2. Then hold the stylus in place to display the drop- down menu and select Locate in Garmin Que to display the Find Address Page. 3. If the address from the Contacts List is in the map database, the City, Number, Street and Postal Code fields will contain the address data.
-
Page 30: Route Navigation
Route Navigation Data Fields Turn Preview Page Save Button Route Turns List Saved Route Options Menu Garmin Que Applications Guide... -
Page 31: Customizing Route Navigation
Automatic Only, or Both. 4. Tap the Customize button to display a page with an adjustment slider for three roadway categories, place the stylus on the slider and drag in the direction desired. Garmin Que Applications Guide... -
Page 32: Road And Area Avoidance
5. Tap OK to place it on the Avoid Area list. Tap the Avoid Page box adjacent to any item to place an “active” check. 6. Tap and hold the stylus on a selected Avoid Areas item to View, Edit or Delete. Garmin Que Applications Guide... -
Page 33: Set Home Point
Edit Vias list. If using the Find feature, follow instructions for using the feature on page 13, select the item and tap OK to return to the Edit Vias list. Route Via Points List Garmin Que Applications Guide... -
Page 34: Detours
2. If you selected “Prompted” from Off-Route Recalculation in System Setup, you will be prompted to recalculate when you leave the route. Guidance Voice Prompt Options To automatically recalculate a Route, see Preferences on page 25. Garmin Que Applications Guide... -
Page 35: The Track Log Utility
To delete a selected saved track, with the track highlighted, tap the appropriate option from Clear Track Log Option the menu. To delete all saved tracks, tap the appropriate option from the menu. Saved Track Details Page Garmin Que Applications Guide... -
Page 36: The Sun And Moon Tables
Sun and Moon graphic animation, tap Menu on Location Options the Tool Bar, then tap your selection. Choose from “Stop”, “By Hour” or “By Day”. Location Options Hunt and Fish Page Animation Options Menu Sun and Moon Page Garmin Que Applications Guide... -
Page 37: The Measure Distance Utility
If you don’t want to lose map detail by zooming out in order view both points on the map, you can tap the Pan Map icon and use the stylus to pan the map to the second point on the map. Garmin Que Applications Guide... -
Page 38: The Trip Computer
Maximum recorded Speed. Reset Prompt • Reset All - Resets all information to zero. To return to the Map Page: Tap the “OK” icon at the top of the screen to return directly to the Map Page. Garmin Que Applications Guide... -
Page 39: Hardware Mapping
The Arrow Button ARDWARE APPING Using the Arrow Button to access Garmin Que features All Pocket PC’s have a four or five position button used for Left Right scrolling lists, etc. For our purposes we will refer to this button as the Arrow button. -
Page 40: Mapping Que Feature Access To Device Hard Buttons
4. To map buttons 1 through 4 for press and hold functions, tap each field to display a list of feature options. Then tap the feature you desire Hard Button Mapping Page Button Options List Garmin Que Applications Guide... -
Page 41: Mapping Data
If you plan to add additional successfully received” when transfer is complete. mapping data or already have other versions of MapSource maps, other than those provided with Garmin Que, you can transfer those maps to the device using the methods described “Send To Device” Button below. -
Page 42: Transferring Waypoints & Saved Tracks To Mapsource
Transferring Waypoints and Saved Tracks to MapSource ® Garmin MapSource allows you to transfer lists of waypoints and saved tracks for storage for later use. This allows you to reduce the number of items stored on your Pocket PC in order to add more without the need for deleting those items you would like to save for future reference. -
Page 43: Additional Information
Operating System: Microsoft Pocket PC 2002 -2003 ® Application Software Garmin “Que”: GPS Info, Address Lookup, Electronic Map- ping, Track Log, Trip Computer, Automatic Route Genera- tion, and Turn-By-Turn Voice Guidance Moving Map Features Basemap: Routable basemap contains state and country... -
Page 44: Troubleshooting Guide
DDITIONAL NFORMATION If you encounter operational problems that you cannot solve using this guide, first determine that they are not related to operation of your Pocket PC, then: Contact Garmin Product Support at 913/397.8200 or 800/800.1020 Troubleshooting Guide Symptom Probable Cause... -
Page 45: Additional Mapsource Data Sets
Garmin Dealer for a vial able MapSource maps compatible for WAAS, refer to the General Settings tab of the System Setup use with the Garmin Que or visit the Garmin website at (www. Page of Garmin Que. For more information, go to http://gps.faa. -
Page 46: Software License Agreement
Product. However, this License will terminate automatically THIS LICENSE AND AGREE TO ITS TERMS. IF YOU DO without notice from GARMIN if you fail to comply with any NOT AGREE, RETURN THE COMPLETE PRODUCT TO of its terms or conditions. You must agree, upon termination, to GARMIN INTERNATIONAL. - Page 47 Commercial Computer Software - Restricted Rights at 48 GarminR 52.227-19, or clause 18-52.227-86(d) of the NASA Supplement to the FAR, as applicable. The contractor/manu- facturer is GARMIN International, Inc., 1200 E. 151st Street, Olathe, KS 66062, USA. 7. EXPORT CONTROLS: You agree not to export or re-export the Product to any country in violation of the export control laws of the United States of America.
-
Page 48: Index
A Waypoint 20 Initialization (GPS) 1 Detailed Maps 7 Interface Settings 12 Details Pages (Find) 13 Intersections, Finding 16 Detours (Adding) 28 Distance, Measuring 31 Language Selection 12 Locate in Garmin Que 23 Location Information 3 Garmin Que Applications Guide... - Page 49 Receiver Status 21 Zooming the Map Scale 2, 3, 33 Recently Found Places 13 Zoom Scale 2, 3 Renaming Waypoints 20 Resetting Trip Information 32 Resume Route Navigation 22 Routes Menu 22 Route Navigation 24 Routing Preferences 25 Garmin Que Applications Guide...
- Page 52 © Copyright 2005 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 E 151st Street, Olathe, Kansas 66062 U.S.A. Tel. 913/397.8200 Fax. 913/397.8282 Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9AQ U.K. Tel. 44/0870.8501241 Fax.