Auto Power Standby Function - Panasonic Viera TX-L32E30B Operating Instructions Manual

TV
1
2
3
4
11
5
6
1 AV2 terminals (p. 91)
2 Headphones jack (p. 91)
CI slot (p. 51)
3
4 SD Card slot (p. 58)
5 HDMI4 terminal (p. 91)
6
USB 3 port (p. 91)
7 Function select
•
[Volume] / [Contrast] / [Brightness] / [Colour] /
[Sharpness] / [Tint] (NTSC signal) / [Bass] ∗ / [Treble] ∗ /
[Balance] / [Auto Setup] (p. 40)
∗ [Music] or [Speech] mode in the Sound Menu
Using the On Screen Displays
Many features available on this TV can be accessed via the On Screen Display menu.
Operation guide
Operation guide will help you to operate by using the
remote control.
Example : [Owner ID]
Owner ID
Please enter new PIN
* * * *
PIN
0 9 PIN entry
EXIT
Operation guide

Auto power standby function

The TV will automatically go to Standby mode in the following conditions:
• no signal is received and no operation is performed for 30 minutes in Analogue TV mode
• [Off Timer] is active in the Timer Menu (p. 19)
• no operation is performed for the period selected in [Auto Standby] (p. 34)
•
This function does not affect the recording of Timer Programming, Direct TV Recording and One Touch Recording.
F
7
8
TV
9
AV
12 13
10
- Operation guide
8 Channel Up / Down, Value change (when using the F
button), Switching the TV On (press either button for
about 1 second when in Standby mode)
9 Changes the input mode
10 Mains power On / Off switch
•
Use to switch the mains power.
If you turned the TV Off during Standby mode by the
remote control last time, the TV will be in Standby
mode when you turn the TV On with Mains power On
/ Off switch.
11 Remote control signal receiver
•
Do not place any objects between the TV remote
control signal receiver and remote control.
12 C.A.T.S. (Contrast Automatic Tracking System)
sensor
•
Senses brightness to adjust picture quality when
[C.A.T.S.] in the Picture Menu is set to [On]
Power and Timer LED
13
•
Red : Standby
Green : On
Orange : Timer Programming On
Orange (flash) :
Recording of Timer Programming, Direct TV
Recording or One Touch Recording in progress
Red with orange flash :
Standby with Timer Programming On, Direct TV
Recording or One Touch Recording
•
The LED blinks when the TV receives a command
from the remote control.
How to use remote control
MENU
Open the main menu
Move the cursor / select the menu item / select
from a range of options
Move the cursor / adjust levels / select from a
range of options
Access the menu / store settings after
adjustments have been made or options have
been set
BACK/
RETURN
Return to the previous menu
EXIT
Exit the menu system and return to the normal
viewing screen
(p. 31)
9