Panasonic Viera TX-L32E30B Operating Instructions Manual page 33

Menu Item
Balance
Headphone Volume
Surround
Auto Gain Control
Volume Correction
Speaker Distance to Wall
Preferred Multi Audio
NICAM
SPDIF Selection
HDMI1 / 2 / 3 / 4 Input
Audio Description
Volume
Speakers
Headphones
Reset to Defaults
Adjustments / Configurations (alternatives)
Adjusts volume level of right and left speakers
Adjusts the volume of the headphones
Surround sound settings [Off] / [V-Audio] / [V-Audio Surround]
[V-Audio] : Provides a dynamic enhancer of width to simulate improved spatial effects
[V-Audio Surround] : Provides a dynamic enhancer of width and depth to simulate
improved spatial effects
Adjusts the current volume level if it is extremely different from the previous viewed
channel or input mode [Off] / [On]
Adjusts the volume of individual channel or input mode
Adjusts the low frequency sound [Over 30cm] / [Up to 30cm]
•
If the gap between the TV and wall is over 30 cm, [Over 30cm] is recommended.
•
If the gap between the TV and wall is within 30 cm, [Up to 30cm] is recommended.
•
Selects the preferred language for digital channel multi audio (depending on the
broadcaster) [English] / [Welsh] / [Gaelic] / [Irish]
Near Instantaneous Companded Audio Multiplex
Reproduces NICAM stereo sound [Off] / [On]
•
Off if reception is poor (FM monaural sound)
•
Analogue mode only
SPDIF : A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT and
HDMI2 (ARC function) terminals [Auto] / [PCM]
[Auto] : Dolby Digital Plus, Dolby Digital and HE-AAC (48 kHz) multi-channel are output
as Dolby Digital Bitstream.
MPEG is output as PCM.
[PCM] : Digital output signal is fixed to PCM.
•
For DVB mode, network video contents (p. 78) or Video mode of Media Player (p. 64)
•
ARC (Audio Return Channel) : A function of digital audio output using HDMI cable
Select to fit the input signal [Digital] / [Analogue] (p. 96)
[Digital] : When sound is carried via the HDMI cable connection
[Analogue] : When sound is not carried via the HDMI cable connection
•
HDMI input mode only
Useful for visually-impaired viewers [Off] / [Auto]
Set to "Auto" to activate the description sound track if available
•
The availability of audio description sound track is indicated by [AD] in the
information banner (p. 18).
•
DVB mode only
Adjusts the volume for Audio Description
•
DVB mode only
Set to [On] to activate the description sound track from TV speakers [Off] / [On]
•
DVB mode only
Set to [On] to activate the description sound track from headphones [Off] / [On]
•
DVB mode only
Press the OK button to reset the present Sound Mode, [Balance], [Headphone Volume]
and [Surround] to the default settings
33