Page 1
Owner’s Manual Manuel du Propriétaire Manual del Propietario 26MF301B LCD TV Necesita ayuda inmediata? 1-866-341-3738 1-866-341-3738 1-866-341-3738 Quick Use Guide Inside! Guide d’usage Rapide Incluse! Guía de Uso Rápido Incluida! MODEL NUMBER SERIAL NUMBER...
Page 2
Registering your model with MAGNAVOX makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete and return your Product Registration Card at once, or register online at www.magnavox.com/support to ensure:...
English IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment Read these instructions. 16. Tilt/Stability - All televisions must comply with recommended Keep these instructions. international global safety standards for tilt Heed all warnings. and stability properties of its cabinet design. Follow all instructions. •...
United States and other countries. regulations concerning chemical wastes. • For product recycling information, please visit - www.magnavox.com WHEN CARRYING THIS UNIT • At least 2 people are required when carrying this unit.
Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law. MAGNAVOX is a registered trademark of Philips Electronics North America Corporation and is used by Funai Electric Co. Ltd. and Funai Corporation,...
Be sure the front and rear of the base match the proper direction. At least 2 people are required for these steps. If you have any questions, please visit our website at magnavox.com/support www. Quick Check the text “FRONT” with “arrow“ on the Base’s...
Remote Control Function (power) p. 11 ➠ Press to turn the unit on and go into standby mode. To completely turn off the unit, you must unplug the AC power cord. 2 SAP p. 13 ➠ 3 SOURCE p. 12 ➠...
English Control Panel POWER p. 11 ➠ Press to turn the unit on and go into standby mode. To completely turn off the unit, you must unplug the AC power cord. 2 CHANNEL + / − p. 12 ➠ Press to select channels or move up ( + ) / down ( − ) through the main menu items.
PREPARATION Connection to Cable Receiver or Satellite Box Use an HDMI or Component Video cables to connect the HDMI or the Component Video Input jacks of the unit to the No supplied cables are used with these connections: HDMI or the Component Video output jacks of the cable •...
English Use ◄/► to select the desired location setting, then press These operations are accessible by remote control. Some may also be accessible by controls on the main unit. Initial Setup Initial Setup Select “Retail” or “Home” for your location. This section will guide you through the unit’s initial setting which includes selecting a language for your on-screen menu and autoprogram, which automatically scans and memorizes...
WATCHING TV Sleep Timer can set the unit to go into standby mode after an incremental period of time. Press SLEEP repeatedly to change the amount of time (increases Sleep 120min. the time by 30 minutes up to 120 minutes). Press SLEEP once to call up the display for checking the remaining time.
English TV Screen Display Mode 5 types of display modes can be selected when the broadcasting station is sending 16:9 or 4:3 video signal. And 3 types of display modes can be selected for PC input signal. Press FORMAT repeatedly to switch the TV aspect ratio. For 16:9 video signal Normal displays a 16:9 picture at its original size.
1 program title To enjoy fun-Link, verifi ed and recommended devices are as 2 program guide follows; ( The program guide added to broadcasting MAGNAVOX SYLVANIA information is displayed to a maximum of 4 lines.) MBP5230 MRD723B NB620SL2...
English USING FUNCTIONS This section describes the overview of the main menu displayed when you press MENU. The main menu consists of the function setting items below. Use ▲/▼ to select a desired menu and an item, then Press MENU to display press OK to determine the setting.
Picture Smart Sound Standard Picture Sound Equalizer Before you begin: Setup Virtual Surround Sound You must set [Home] in [Location]. p. 23 ➠ Features Auto Volume Leveling Otherwise, the settings you adjusted will not be memorized Language TV Speakers Ext. Amp Primary MTS Stereo after the unit goes into standby mode.
English Primary MTS You can set the output mode as a default for the sound mode Please wait while the system is scanning for channels. Auto programming may take more than 20 minutes to complete. (NTSC only). This setting is not interlocked when you change the output mode by pressing SAP.
Add Channels Features This function lets you add the off the air along NTSC or analog Cable channels that were not added by the autoprogram due to reception conditions at the initial setting. Use ▲/▼ to select the item you want to adjust, then press Use ▲/▼...
Page 19
English A. Caption Service A. Caption Service Use ▲/▼ to select [On], then press OK. Use ▲/▼ to select an item, then press OK. Then use Use ▲/▼ to select [Caption Service], then press OK. ▲/▼ to select the desired setting and press OK. Use ▲/▼...
Page 20
A. Channel Lock A. Channel Lock Child Lock Child lock reads the ratings for programs, then denies access Particular channels or external input modes can be invisible in to the programs which exceed the rating level you set. With this function. this function, you can block certain programs inappropriate for children and any channels or external input modes can be invisible.
Page 21
English C. Setting TV ratings C. Setting TV ratings D. Change PIN D. Change PIN Although the default PIN code (0000) is supplied with the unit, Use ▲/▼ to select [US TV Ratings Lock], then press OK. you can set your own PIN code. Use ▲/▼...
Device Control fun-Link (HDMI CEC) You can operate some functions such as disc playback or call This function allows you to operate the linked functions up the menu of the connected devices, by using this unit’s between our brand devices with a fun-Link feature and this remote control.
English Location Language You must set [Home] in this setting. Otherwise, [Picture] and [Sound] settings you adjusted will not be memorized after you Use ▲/▼ to select [English], [Español] or [Français], then turn off the unit. press OK. Use ▲/▼ to select [Location], then press OK. Picture Use ▲/▼...
CONNECTING DEVICES Note • Use an HDMI cable with the HDMI logo (a certifi ed HDMI cable). High Speed HDMI cable is recommended for the better compatibility. No supplied cables are used with these connections: For HDMI connection (use HDMI 1, 2 or 3 Input jack) •...
English Composite Video Connection Analog Audio Output Connection Composite Video connection offers standard picture quality (for both analog and digital broadcasting) for video devices connected to the unit. If you connect to the If you connect this unit to an external analog audio device, you unit’s Composite video Input jack, connect audio cables to can enjoy stereo (2-channel) audio.
USEFUL TIPS Question Answer • Check the antenna or cable connection to the main unit. • Check the batteries of the remote control. • Check if there is an obstacle between the infrared sensor window and the remote control. • Test the signal output use [IR Signal Check].
Page 27
English Symptom Remedy • Check if the power is on. • Check if the correct input mode is selected. • Check whether all the cables to the unit are connected to the correct output jack of your device like Blu-ray / DVD recorder. •...
INFORMATION Glossary Maintenance ATSC Cabinet Cleaning Acronym that stands for Advanced Television Systems Committee and the name of the digital broadcasting standards. • Wipe the front panel and other exterior surfaces of the Aspect Ratio unit with a soft cloth. The width of a TV screen relative to its height.
English General Specifi cations Other Specifi cations TV format ATSC / NTSC-M TV standard Terminals Closed Caption system Antenna Input VHF / UHF / CATV 75 Ω unbalanced (F-type) §15.122 / FCC (digital CC) Audio Input RCA jack (L/R) x 6 500mV rms §15.119 / FCC (analog CC) Composite Video Input...
English LIMITED WARRANTY NINETY ( 90 ) DAY LABOR / ONE ( 1 ) YEAR PARTS WARRANTY COVERAGE: This warranty obligation is limited to the terms as set forth mission, or (d) if any serial number has been removed or defaced, below.
Page 32
License 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may This section describes software license used for this product. be distributed under the terms of this General Public License. This product uses some open source software: The “Program”, below, refers to any such program or work, GPL software: liba52.c, scalfact.c...
Page 33
In addition, mere aggregation of another work not based on 7. If, as a consequence of a court judgment or allegation of the Program with the Program (or with a work based on the patent infringement or for any other reason (not limited to Program) on a volume of a storage or distribution medium patent issues), conditions are imposed on you (whether by does not bring the other work under the scope of this License.
Page 34
NO WARRANTY Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for 11. BECAUSE THE PROGRAM IS LICENSED FREE OF details type `show w’. This is free software, and you are welcome CHARGE, THERE IS NO WARRANTY FOR THE to redistribute it under certain conditions;...